SHOP AND JET PUMP TOOLS

 

    Impeller Puller
    		 Impeller Puller for Berkeley, American Turbine, Aggressor and Other Similar Impellers
    This Puller fits and captures the entire snout surface of an impeller. This results in an even 360' pull and greatly reduces the possibility of breakage.
    #ARS 758100
    Splined Shaft Socket Splined Shaft Socket
    This special wrench fits over the spline on the end of the pump shaft enabling you to hold the shaft while tightening or loosening the impeller nut. 1/2'' drive.
    #ARS 758800
    Impeller Nut Socket Impeller Nut Socket
    This special socket fits over the end of the pump shaft to loosen tighten the impeller nut. 1/2'' drive.
    #ARS 758900

Drill and Tap Kits 

Drill and Tap Kit
Kits include the following: “one each”

  • Tap. ~~ Specify Plug Tap or Bottoming Tap and Size when ordering.
  • Tap Drill.
  • Clearance Drill.

Sizes Available

4-40
10-24
1/4-28
3/8-16
7/16-20
5/8-11
6-32
10-32
5/16-18
3/8-24
1/2-13
5/8-18
8-32
1/4-20
5/16-24
7/16-14
1/2-20

All kits are standard right hand thread, unless otherwise specified!

Carbide Rotary Files

Solid 1/8” shank
Flute Dia
Flute Length
Solid Carbide Rotary File
#ARS SG-43
1/8”
3/8”
Solid Carbide Rotary File
#ARS SC-42
1/8”
9/16”

Inverted Cone Shape
1/4" Shank
Flute Dia
Flute Length
Inverted Cone Carbide Rotary File
#ARS SN-5D
5/8”
5/8”

Cone Shape Carbide Rotary Files
For Use on Aluminum 1/4” Shank
Flute Dia
Flute Length
Small Cone Carbide Rotary File
#ARS SL-3A
3/8”
1, 1/16”
Large Cone Carbide Rotary File
#ARS SL-5A
5/8”
1, 3/16”

EGG Shape Carbide Rotary Files
For Use on Aluminum 1/4” Shank
Flute Dia
Flute Length
Egg Shape Carbide Rotary File
#ARS SE-3A
3/8”
5/8”

Tree Radius Carbide Rotary Files
For Use on Aluminum 1/4” Shank
Flute Dia
Flute Length
Tree Radius Carbide Rotary File
#ARS SF-6A
5/8”
1.0”

 

 

home page | about us | services | ARS parts | shop online | on sale | contact us | links | gallery